| |
| Product Name: | ARDROX® 1074 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Brightener, corrosion remover and etchant for aluminium,
concentrated, spray or brush. | |
| Long Description: | Primarily intended as an application cleaner for aluminium. It will remove tarnish, oxide films and light oil and leave a slightly etched surface. Ardrox 1074 is suitable for the preparation of aircraft and transport vehicle bodies prior to painting or the application of other protective systems such as chromate conversion coatings. It is useful as a treatment prior to spot welding or adhesive bonding of aluminium. Degree of dilution depends on the use. Spray or brush application. | |
| Technical Datasheet: |  TDS Ardrox 1074_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
![[Top]](pix/up.gif) |
| Product Name: | ARDROX® 11 | |
| Category: | Cleaning General | |
| Short Description: | Scale and rust remover, inhibited phosphoric acid,
brush, spray or immersion | |
| Long Description: | Removal of rust, heat treatment scale and welding scale from ferrous metals. Corrosion products on aluminium, copper and zinc alloys may also be removed. It is especially suitable for use on chromium plated ferrous materials and surfaces which require very close tolerances. Spray or immersion application. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1103 | |
| Category: | Paint Carbon and Oxide Removal | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 120F | |
| Category: | Cleaning General | |
| Short Description: | Heavy duty exterior cleaner, emulsion, concentrated,
brush, spray or immersion
THIS PRODUCT IS NOT AVAILABLE IN THE EUROPEAN COMMUNITY.
| |
| Long Description: | Heavy duty, water dilutable emulsion cleaner for removal of oils, greases, carbonaceous deposits and other solvent soluble soils. Brush, spray or immersion application at dilutions approriate to the task.
THIS PRODUCT IS NOT AVAILABLE IN THE EUROPEAN COMMUNITY | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1218 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale and rust remover, inhibited phosphoric acid,
brush, spray or immersion. | |
| Long Description: | Removal of rust, heat treatment scale and welding scale from ferrous metals. Corrosion products on aluminium, copper and zinc alloys may also be removed. It is especially suitable for use on chromium plated ferrous materials and surfaces which require very close tolerances. Spray or immersion application. | |
| Technical Datasheet: | TDS Ardrox 1218_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1262 | |
| Category: | Cleaning General | |
| Short Description: | Acid cleaner for removing iron dust from aluminium | |
| Long Description: | ARDROX 1262 is an aqueous product containing acid and surfactants. It does not contain solvent. ARDROX 1262 is used for the removal of iron oxides and steel shot contamination after peening of aluminium, in particular aircraft wing panels. Used as supplied | |
| Technical Datasheet: | TDS Ardrox 1262_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1266 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Liquid acid etch for aircraft | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 14 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale and rust remover, inhibited hydrochloric acid,
immersion. | |
| Long Description: | Removal of rust, heat treatment scale and welding scale from ferrous metals, used by immersion. | |
| Technical Datasheet: | TDS Ardrox 14_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1406 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale Conditioner, immersion, ready to use. | |
| Long Description: | Removal of complex metallic oxides from engine components manufactured from nickel cobalt alloys and the heat resisting chromium iron, alloys.
It is free from chlorides, fluorides, phenolic materials and oxidizing agents. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 140B | |
| Category: | Cleaning General | |
| Short Description: | Aircraft exterior cleaner, aqueous / solvent, concentrate | |
| Long Description: | Ardrox 140B is a blend of biodegradable surfactants, solvents and corossion inhibitors in an aqueous base for cleaning aircraft exteriors and ground handling equipment. | |
| Technical Datasheet: | TDS Ardrox 140B_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 160 | |
| Category: | Miscellaneous | |
| Short Description: | Brightener for copper, copper alloys and other non-ferrous metals | |
| Long Description: | ARDROX 160 is a blend of mineral acid and strong oxidising agents. It is designed to remove corrosion products and brighten copper, copper alloys, zinc and aluminium. After treatment, the metal surface is left in a passive condition so that re-oxidation and tarnishing is delayed.
It is an effective de-smutter for aluminium treated with alkaline products. | |
| Technical Datasheet: | TDS Ardrox 160_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 1618 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint, carbon, rust, lead deposit remover, concentrated,
immersion | |
| Long Description: | Cleaning of ferrous parts of engines which have become heavily contaminated in service. It will remove carbon, paint, rust and lead deposits. Immersion application. | |
| Technical Datasheet: | TDS Ardrox 1618_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 161K | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner, quick drying, wipe. | |
| Long Description: | Removal of oil and grease from metal surfaces by wipe application. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1630 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale conditioner for titanium, used with Ardrox 1635,
supplied as powder, immersion. | |
| Long Description: | This material is for conditioning scale on titanium components in preparation for removal with Ardrox 1635. Supplied as an inhibited alkaline powder for dissolution in water. Immersion application. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1630 RTU | |
| Category: | Cleaning General | |
| Short Description: | Scale conditioner for titanium, used with Ardrox 1635,
supplied ready to use, immersion. | |
| Long Description: | This material is for conditioning scale on titanium components in preparation for removal with Ardrox 1635. Supplied as an inhibited alkaline liquid ready to use. | |
| Technical Datasheet: | ARDROX 1630 RTU_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1635 | |
| Category: | Cleaning General | |
| Short Description: | Scale remover for titanium, used with Ardrox 1630 | |
| Long Description: | Acidic scale remover for titanium components. Used by immersion following scale conditioning with Ardrox 1630. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 179R | |
| Category: | Cabin Care | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 180B | |
| Category: | Cleaning General | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 185 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Rust remover, alkaline, immersion, powder, will remove oil, grease and some
paints. | |
| Long Description: | Primarily intended for the removal of rust from iron and steel, it is also capable of removing oil, grease and some air-dried paints. The material is supplied as water-soluble powder giving a strongly alkaline solution containing sequestrants. Application by immersion | |
| Technical Datasheet: | TI Ax 185_185L dt-engl 11-08-11_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1854 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Carbon, grease, paint and rust remover, immersion,
liquid concentrate. | |
| Long Description: | A general purpose cleaner which will remove oil, grease, rust, carbon and many types of paint. Rust is removed without attack on the base steel and there is markedly less tendency for re-rusting to occur compared with acid pickling. Dilution dependant on use. Immersion application. | |
| Technical Datasheet: | TDS Ardrox 1854_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 185L | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Alkali rust remover, will remove oil, grease and some
paints, supplied as a liquid, immersion. | |
| Long Description: | A liquid version of Ardrox 185 it is primarily intended for the removal of rust from iron and steel, it is also capable of removing oil, grease and some air dried paints. Supplied as a water miscible liquid giving a strongly alkaline solution containing sequestrants thus minimising the exothermic reaction when Ardrox 185 is dissolved in water. Dilution dependant on use. Immersion application. | |
| Technical Datasheet: | TI Ax 185_185L dt-engl 11-08-11_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1871 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale remover, nickel cobalt alloys, austinitic
stainless steels, liquid, concentrate. | |
| Long Description: | Removal of heat scale from heat resisting alloys based on nickel and cobalt and from austinitic stainless steels. Light scale may be removed by Ardrox 1871 alone but heavy scale will require the additional use of Ardrox 188. Supplied as liquid for dilution with water, mildly acidic, dilution dependant on use. Immersion application. | |
| Technical Datasheet: | TDS Ardrox 1871_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1873 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale remover, ferritic chromium steels, liquid,
concentrate, immersion. | |
| Long Description: | Removal of heat scale from ferritic chromium steels it will also remove heat scale from Nimonic alloys but not as efficiently as Ardrox 1871 or Ardrox 1873A. Supplied as liquid for dilution with water, mildly acidic, immersion application. | |
| Technical Datasheet: | TDS Ardrox 1873_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1873A | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale remover, chrome steels, stainless steels, nickel
cobalt alloys, liquid, concentrate, immersion. | |
| Long Description: | Scale removal from chrome steels, stainless steels, nickel and cobalt alloys. Supplied as liquid for dilution with water, mildly acidic, immersion application. | |
| Technical Datasheet: | TI Ax 1873A dt-engl 12-01-17_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 188 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale conditioner, high chromium steels and nickel
cobalt alloys, supplied as a powder, immersion. | |
| Long Description: | Scale conditioner for high chromium steels and nickel and cobalt alloys. Treatment with Ardrox 188 modifies the scale to facilitate removal with mildly acidic materials such as Ardrox 1871, Ardrox 1873 or Ardrox 1873A. Supplied as a powder for dissolution in water. Alkaline permanganate | |
| Technical Datasheet: | TDS Ardrox 188_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 188LC | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Additive for use with Ardrox 188 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 188LP | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Additive for use with Ardrox 188 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 188RFU | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Scale conditioner, high chromium steels and nickel
cobalt alloys, ready for use, immersion | |
| Long Description: | Scale conditioner for high chromium steels and nickel and cobalt alloys. Treatment with Ardrox 188 modifies the scale to facilitate removal with mildly acidic materials such as Ardrox 1871, Ardrox 1873 or Ardrox 1873A. Supplied as a ready to use liquid. Alkaline permanganate. Immersion application. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1900B | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, aircraft , exterior, interior, heavy duty,
thixotropic, application. | |
| Long Description: | A heavy duty, thixotropic, alkaline cleaner for the exterior and interior cleaning of aircraft and ground handling equipment. It can also be used as a decarboniser for engine and component cleaning. It is pleasantly scented and all the surfactants employed in the formulation are completely biodegradable and it is phosphate free. | |
| Technical Datasheet: | TDS Ardrox 1900B_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 1900C | |
| Category: | Cleaning General | |
| Short Description: | Heavy duty aircarft cleaner, interior and exterior use, gel-type. | |
| Long Description: | ARDROX® 1900C is a heavy duty, thixotropic, alkaline cleaner for the exterior and interior cleaning of aircraft and ground handling equipment. It can also be used as a decarboniser for engine and component cleaning. | |
| Technical Datasheet: | tds Ardrox 1900C dt-engl 06-02-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 204 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, will remove chromate primers, application, water washable. | |
| Long Description: | ARDROX 204 is a versatile general purpose paint remover for use by brush application. It will remove a wide range of paint finishes including chromate primers. It is water rinseable making its removal easy and leaving a clean surface but it is not suitable for removing paint from plastic materials, including glass fibre and carbon fibre reinforced laminates. | |
| Technical Datasheet: | TDS Ardrox 204_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2106 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, methylene chloride, ready to use,
application. | |
| Long Description: | A water washable methylene chloride based application paint remover designed for spray application removes paint schemes including alkyds, acrylics, celluloses, zinc chromate primers and some polyurethanes especially polyurethane on etch (wash) primer.
A high viscosity version, Ardrox 2106 HV exists for brush application. | |
| Technical Datasheet: | TDS Ardrox 2106_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2106HV | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, methylene chloride, ready to use,
application. | |
| Long Description: | A water washable methylene chloride based application paint remover designed for brush application ( it may be sprayed with the correct equipment ) it removes paint schemes including alkyds, acrylics, celluloses, zinc chromate primers and some polyurethanes especially polyurethane on etch (wash) primer.
A lower viscosity version, Ardrox 2106, exists for spray application. | |
| Technical Datasheet: | TDS Ardrox 2106 HV_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 2204 | |
| Category: | Cleaning General | |
| Short Description: | Silicone-rubber remover, ready to use, immersion. | |
| Long Description: | Rapid removal of silicone and other bonding rubbers and abradable rubber coatings. The product contains chlorinated solvents but is water washable. Immersion application at ambient temperature. | |
| Technical Datasheet: | TDS Ardrox 2204_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2204AA | |
| Category: | Cleaning General | |
| Short Description: | Alkaline additive for Ardrox 2204 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2204SA | |
| Category: | Cleaning General | |
| Short Description: | Solvent additive for Ardrox 2204 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2302 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, immersion | |
| Long Description: | Removal of a wide range of paint schemes including stoved acrylics, epoxies, polyurethanes and phenolics. It will also remove carbon or carbonaceous deposits, polymerised gum and lacquer deposits. Immersion application. | |
| Technical Datasheet: | TDS Ardrox 2302_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2302 AA | |
| Category: | Paint Carbon and Oxide Removal | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2302 SA | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Solvent additive for Ardrox 2302 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2302 Seal | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Seal oil for use with Ardrox 2302 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2312 | |
| Category: | Cleaning General | |
| Short Description: | Silicone-rubber remover, methylene chloride free, ready
to use, immersion. | |
| Long Description: | Rapid removal of silicone and other bonding rubbers and abradable rubber coatings. This material is water washable. Immersion application at ambient temperature. Methylene chloride free. | |
| Technical Datasheet: | TI ax 2312 dt-engl 10-04-29_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2320 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, environmentally advantaged, 2 liquid
concentrates, immersion or spray, will also remove carbon. | |
| Long Description: | Removal of a wide range of paint schemes including stoved acrylics, epoxies, polyurethanes and phenolics. It will also remove carbon or carbonaceous deposits, polymerised gum and lacquer deposits.The material is a di-phase aqueous blend of solvent, activators and corrosion inhibitors. Immersion or spray. | |
| Technical Datasheet: | TDS Ardrox 2320_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2410B | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, aircraft, exterior, thrust reverser, decarboniser,
ready to use, application | |
| Long Description: | Removal of carbonaceous deposits from aircraft exteriors and thrust reversers. Thixotropic, water washable. No petroleum distillates or chlorinated solvents. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 245L | |
| Category: | Cleaning General | |
| Short Description: | Aircraft exterior cleaner, heavy duty, application | |
| Technical Datasheet: | TDS Ardrox 245L_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2526 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, heavy duty, methylene chloride, phenol,
ready to use, application. | |
| Long Description: | Removal of the more resistant types of polyurethane and epoxy surface coatings. Contains phenol and methylene chloride. A lower viscosity version,
Ardrox 2526 SV, which is more easily spray applied, is available. | |
| Technical Datasheet: | TDS Ardrox 2526_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 252L | |
| Category: | Gas Path Cleaning | |
| Short Description: | Solvent based Gas Path Cleaner | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 266 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, ready to use, immersion. | |
| Long Description: | Removal of stoved epoxy and polyurethane paint films as well as many other industrial paint finishes. Operates as a two phase system to minimise evaporation. | |
| Technical Datasheet: | TDS Ardrox 266_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 275G | |
| Category: | Exterior Cleaning | |
| Short Description: | Impregnated pads for removal of rain repellent coatings from cock-pit windows. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2814 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Acid activated, benzyl alcohol application paint remover. | |
| Long Description: | Ardrox 2814 is ready for use as supplied. Prior to application consult the OEM or own internal documentation for the appropriate masking procedures for materials sensitive to this type of product.
Application is by spray using a piston pump and spray lance. It may also be applied by pouring over the surafce. Remove after aue by squeegee water rinsing or other suitable method. | |
| Technical Datasheet: | TDS Ardrox 2814_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2865 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Neutral benzyl alcohol application paint remover. | |
| Long Description: | Ardrox 2865 is ready for use as supplied. Prior to application consult the OEM or own internal documentation for the appropriate masking procedures for materials sensitive to this type of product.
Application is by spray using a piston pump and spray lance. It may also be applied by pouring over the surafce. Remove after use by squeegee, water rinsing or other suitable method. | |
| Technical Datasheet: | TDS Ardrox 2865_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2870 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Ardrox 2870 is a peroxide-accelerated application paint remover | |
| Long Description: | Ardrox 2870 is a peroxide-accelerated paint remover. It is designed to remove durable paint systems, such as epoxy and polyurethane, from aircraft and other surfaces. It contains no halogenated solvents, and its combination of near neutral pH and low odour make it an excellent choice in areas where personnel are working. | |
| Technical Datasheet: | TDS Ardrox 2870_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 2871 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Ardrox 2871 is a peroxide-accelerated application paint remover. | |
| Long Description: | Ardrox 2871 is a peroxide-accelerated paint remover. It is designed to remove durable paint systems, such as epoxy and polyurethane, from aircraft and other surfaces. It contains no halogenated solvents, and its combination of near neutral pH and low odour make it an excellent choice in areas where personnel are working. | |
| Technical Datasheet: | Ardorx 2871 tds nov06 engl_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 29 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, ready to use, acidic, immersion | |
| Long Description: | Removal of the more obdurate paint schemes and coatings which are normally resistent to chlorinated paint removers. It finds particular application in the removal of Kearsley laquer and stoved silicone epoxy based coatings (PL 135). | |
| Technical Datasheet: | TDS Ardrox 29_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 295G | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Deoxidiser, desmut, etchant for aluminium. | |
| Long Description: | Desmutting of aluminum and aluminum alloys following cleaning or etching.It is chromate free and therefore it can be used without problems where there is restriction relative to the disposal of chromate wastes. This product provides a clean, oxide and smut free surface in preparation for spot welding, anodizing, chromate conversion coatings or barrel burnishing | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 295GD | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Deoxidiser, desmut for aluminium, liquid concentrate,
non-chrome | |
| Long Description: | Desmutting of aluminum and aluminum alloys following cleaning or etching. It is chromate free and therefore it can be used without problems where there is restriction relative to the disposal of chromate wastes. This product provides a clean, oxide and smut free surface in preparation for spot welding, anodizing, chromate conversion coatings or barrel burnishing | |
| Technical Datasheet: | TI ax 295 GD engl 10-08-12_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3000W | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, methylene chloride, ready to use,
application. | |
| Long Description: | Removal of epoxy, polyurethane and similar organic coatings from metal surfaces. Water rinsable, methylene chloride based, application. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 305N | |
| Category: | Temporary Protective Coating | |
| Short Description: | Temporary protective coating, alkali removable,
ready to use. | |
| Long Description: | Protection from abrasion and oxidation of aluminium during storage, shipment, etc. It produces a hard, smooth tightly adherent transparent gold coating which cures rapidly at ambient temperatures, has excellent resistance toward blocking, and is easily removed with alkaline stripping compounds. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 306N | |
| Category: | Temporary Protective Coating | |
| Short Description: | Temporary protective coating, alkali removable | |
| Long Description: | Protection from abrasion and oxidation of aluminium during storage, shipment, etc. It produces a hard, smooth, tightly adherent transparent green coating which cures rapidly at ambient temperatures, has excellent resistance toward blocking, and is easily removed with alkaline stripping compounds. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3107 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Temporary corrosion protective, water displacing | |
| Long Description: | Dewatering and corrosion protection of electrical equipment operating at voltages up to about 120 volts. A thin corrosion resisting film is left on the surface. The material does not attack insulating materials. | |
| Technical Datasheet: | TDS Ardrox 3107_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 311 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion preventive, long term, oil based. | |
| Long Description: | Corrosion preventive for metal surfaces. Suitable for use under conditions of high humidity. It is suitable for the lubrication and preservation of machine guns and small arms at a range of ambient temperatures, from -18 C upwards. It is also suitable for the preservation of internal combustion engines and engine components, small mechanisms, ball and roller bearings, instruments, phosphated iron and steel sheets and aluminium sheets. Additionally the material is very resistant to oxidation at high temperature, even in the presence of copper and is suitable for machinery which will run hot. | |
| Technical Datasheet: | TDS Ardrox 311_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3140 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion protective, long term, film forming. | |
| Long Description: | Long term protectionof metal surfaces under conditions of high humidity including those which are to be stored or transported in tropical climates. The coating produced is resistant to rain and is suitable for outdoor storage and, while it will not resist severe mechanical abrasion, the fully cured coating will withstand normal handling operations.
As the film dries it passes through various stages forming first a tacky film, then a soft film and finally, when solvent evaporation is complete, a firm, rubbery film. The dark brown colour of the coating enables those areas of incomplete or light coverage to be easily seen. | |
| Technical Datasheet: | TI ax 3140 dt-engl 05-12-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 321N | |
| Category: | Temporary Protective Coating | |
| Short Description: | Temporary protective coating, alkali removable | |
| Long Description: | Protection from abrasion and oxidation of aluminium during storage, shipment, etc. It produces a hard, smooth, tightly adherent transparent green coating which cures rapidly at ambient temperatures, has excellent resistance toward blocking, and is easily removed with alkaline stripping compounds. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 345N | |
| Category: | Temporary Protective Coating | |
| Short Description: | Temporary protective coating, supplied as Aerosol only. | |
| Technical Datasheet: | Ardrox 345-N_TI Nov2011_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 355DU | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Deoxidiser, brightener, corrosion remover, aircraft,
application. | |
| Long Description: | Rapid removal of corrosion by-products and oxides from aluminum aircraft surfaces while leaving no corroding residues on the aluminum surface
The material is completly biodegradable, contains no chromates, is extremely free rinsing and produces no obnoxious fumes. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 3702 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Final rinse additive for phosphate lines, passivant | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3705 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Water soluble corrosion inhibitor | |
| Long Description: | Ardrox 3705 is for addition to rinse waters to stop flash rusting of ferrous components. Up to 8 weeks in-door protection can be achieved. | |
| Technical Datasheet: | TDS Ardrox 3705_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3961 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Temporary corrosion protective, water displacing | |
| Long Description: | A blend of surfactants, corrosion inhibitors and oil in a petroleum-based solvent. It has excellent dewatering and penetrating properties and leaves a thin, oily film on articles to which it is applied. This film will impart good indoor corrosion protection. It is not recommended for outdoor storage protection where other Ardrox products, for example ARDROX 3302 or ARDROX 3140, will provide long-term outdoor protection. | |
| Technical Datasheet: | Ardrox 3961 _pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3965 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Temporary corrosion protective | |
| Technical Datasheet: | TDS Ardrox 3965_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3966 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Temporary corrosion protective, water displacing | |
| Long Description: | Corrosion prevention and water displacement from aircraft components and assemblies.The material produces a thin oil film which is compatible with many Ardrox long term corrosion potectives .
| |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 3968 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Temporary corrosion protective, water displacing and fingerprint removing | |
| Long Description: | Dewatering and corrosion inhibiting fluid which will displace water from metal surfaces. It contains a volatile solvent and after evaporation, a very thin film remains on the metal surface. | |
| Technical Datasheet: | TI ax 3968 dt-engl 07-03-22_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 396/1 E8 | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Temporary corrosion protective, water displacing | |
| Long Description: | ARDROX® 396/1 E8 is a blend of surfactants, corrosion inhibitors and oil in a petroleum-based solvent. It is designed to have excellent dewatering and penetrating properties and will leave a thin, oily film. This film will impart good corrosion protection. ARDROX® 396/1 E8 is not recommended for outdoor storage protection. Other ARDROX® products, e.g. ARDROX 3140, are available for long-term protection outdoors. | |
| Technical Datasheet: | TI ax 396-1 E8 dt-engl 10-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 485R | |
| Category: | Cabin Care | |
| Short Description: | Carpet shampoo, liquid, concentrate. | |
| Long Description: | Gentle removal of deeply embedded dirt from wool and synthetic fiber carpets using a Hydro-Soil Extractor type cleaning machine, it also freshens carpets and gives revived lift and life. Contains soil retardants, optical brighteners, odour eliminators, anti static agents and is non-corrosive. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5105 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner, chlorinated, fast drying, nonflammable | |
| Long Description: | Ardrox 5105 has a wide application for the in-situ cleaning of electrical and electronic equipment which cannot be cleaned by aqueous solutions or with flammable solvents. It evaporates completely and is, therefore, suitable for cleaning the most delicate instruments.
Ardrox 5105 can be used in conjunction with the Ardrox dye penetrant and magnetic particle systems. | |
| Technical Datasheet: | TDS Ardrox 5105_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 5300W | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, immersion | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5300W AA | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Additive for use with Ardrox 5300W | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5300W SA | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Additive for use with Ardrox 5300W | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5300W Seal | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Additive for use with Ardrox 5300W | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5403 | |
| Category: | Exterior Cleaning | |
| Short Description: | Aircraft de-icing fluid | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5410 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5412 | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, solvent, non-chlorinated, high flash point,
immersion, wipe. | |
| Long Description: | Removal of oils, grease, adhesives, inks, paints and other solvent soluble soils from metal surfaces. It can be used as a wipe solvent or in immersion tanks. Cleaned surfaces may be wiped dry or rinsed with water and dried. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5413 | |
| Category: | Cleaning General | |
| Short Description: | Remover for uncured polysulphide sealants | |
| Long Description: | Ardrox 5413 is a non-chlorinated solvent product which is intended to be used for removing uncured polysulfide sealant and engine jointing compounds during aircraft manufacture and maintenance.
It may also be used as a dry cleaning solvent to remove oils and greases. Ardrox 5413 is available in bulk and also in tubs of impregnated wipes for easier use. | |
| Technical Datasheet: | TDS Ardrox 5413_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5414 | |
| Category: | Cleaning General | |
| Short Description: | Cleaner for removing wax from metal parts. | |
| Long Description: | Ardrox 5414 is a blend of solvents and emulsifiers formulated for the removal of "stop-off" wax from plated metal components. It has a high flash point, is used hot and rinses off completely with tap water. | |
| Technical Datasheet: | TDS Ardrox 5414_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5500 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner free of aromatics | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5501 | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, solvent | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5502 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner, PD 680 | |
| Long Description: | General solvent cleaner for oils and grease leaving the surface in a dry condition. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5503 | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, solvent, PD 680, Type II | |
| Long Description: | General solvent cleaner for oils and grease leaving the surface in a dry condition. | |
| Technical Datasheet: | TDS Ardrox 5503_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5504 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner, PD 680 Type 3 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 552 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner, high flash, rapid evaporation, non-chlorinated | |
| Long Description: | A mixture of aliphatic hydrocarbons, for cleaning and degreasing mechanical parts, flash point 65 C. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5526 | |
| Category: | Cleaning General | |
| Short Description: | Non-chlorinated solvent cleaner | |
| Long Description: | General purpose solvent cleaner for removal of oils, greases and dirt | |
| Technical Datasheet: | TDS Ardrox 5526_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5528 | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, solvent, non-flammable,immersion,
spray or wipe. | |
| Long Description: | A solvent cleaner for electrical and electronic equipment. It can also be used as a general purpose dry cleaning solvent to remove oil contamination on metal surfaces by immersion, spray or wipe. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 5529 | |
| Category: | Cleaning General | |
| Short Description: | General purpose solvent cleaner | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5531 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner pre-impregnated into paper wipes | |
| Long Description: | Ardrox 5531 Wipes comprise low lint, high strength wipes impregnated with Ardrox 5531. The wipes enable application of the optimum amount of product, to prevent wastage of the Ardrox 5531 and minimise VOC levels.
This combination is used for the removal of various contaminants such as uncured polysulfide sealant, grease and oils from a variety of surfaces. | |
| Technical Datasheet: | TDS Ardrox 5531_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 5548 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 5564 | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner | |
| Long Description: | Non-chlorinated solvent. Good for cleaning paint spray guns and adhesive application equipment. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 600 | |
| Category: | Cleaning General | |
| Short Description: | NO INFORMATION | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 600W | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, application | |
| Long Description: | Removal of epoxy, polyurethane and similar organic coatings from metal surfaces. Non-flammable, water rinsable, phenol and cresol free, acid activated. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6017 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft drywash and polish, concentrate. | |
| Long Description: | Cleaning and polishing compound for painted and unpainted surfaces. It can be applied day or night, during periods of high humidity or dew, to wet or dry surfaces with no hazing problems and may be diluted with water. It does not powder or dust, it is easy to apply, simply spray on, wait a few minutes and wipe off with a clean mop, removing soils, oxides and exhaust tracks. It can be used full strength for all landing gear surface cleaning. | |
| Technical Datasheet: | TDS Ardrox 6017_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 601W | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Paint remover, application | |
| Long Description: | A thickened, non-flammable paint remover which effectively removes epoxy, polyurethane and similar organic coatings from metal surfaces. It is free of phenol and other cresylic materials. Clings to vertical as well as horizontal surfaces. | |
| Technical Datasheet: | TDS Ardrox 601W_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6021 | |
| Category: | Cleaning General | |
| Short Description: | Heavy duty exterior cleaner, application, biodegradable | |
| Long Description: | Ardrox 6021 is a thickened blend of alkalis, water soluble solvents and surface active agents and is free from phosphates and petroleum solvents. It has a pleasant smell and is free rinsing leaving a streak and spot free surface | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6023 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft dry wash and polish, concentrate. | |
| Long Description: | Cleaning and polishing compound for painted and unpainted surfaces. It can be applied day or night, during periods of high humidity or dew, to wet or dry surfaces with no hazing problems and may be diluted with water. It does not powder or dust, it is easy to apply, simply spray on, wait a few minutes and wipe off with a clean mop, removing soils, oxides and exhaust tracks. It can be used full strength for all landing gear surface cleaning. | |
| Technical Datasheet: | TI ax 6023 dt-engl 07-11-07_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6025 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft exterior cleaner, general purpose, primary
cleaner, concentrate. | |
| Long Description: | Cleaning the exterior surfaces of aircraft but it is also suitable for use as a primary cleaner in aero engine overhaul processes. It may be applied to aircraft as a prefoamed cleaner by use of a foam application unit. It may also be used for the removal of light grease and oils, sooty deposits and other soils from a wide variety of metallic and non-metallic surfaces. | |
| Technical Datasheet: | TDS Ardrox 6025_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6049 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft interior cleaner, heavy duty, concentrate | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6049RTU | |
| Category: | Cleaning General | |
| Long Description: | Aircraft interior cleaner ready to use version of 6049 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 6076 [ Previous name Aviaclenz Natural Citrus Cleaner ] | |
| Category: | Cabin Care | |
| Short Description: | Aircraft interior cleaner, biodegradable | |
| Long Description: | Ardrox 6076 is based on a blend of natural citrus solvents, emulsifiers and surfactants; it is petroleum solvent free. Ardrox 6076 will remove a wide range of soils including oils, greases, chewing gum, tar, inks, adhesives, tyre marks, decals and soap scum. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6077 [ Previous name Aviaclenz Window Cleaner Plus ] | |
| Category: | Cleaning General | |
| Short Description: | Aircraft window cleaner | |
| Long Description: | ARDROX 6077 has been formulated specifically to safely clean aircraft windows. It is a blend of surfactants, water and isopropanol. It is wax-free and non-corrosive. | |
| Technical Datasheet: | TDS Ardrox 6077_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6078 [ Previous name Aviaclenz Window Cleaner Plus Concentrate] | |
| Category: | Cleaning General | |
| Short Description: | Aircraft window cleaner | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 6082 [ Previous name Aviaclenz LF Carpet Cleaner ] | |
| Category: | Cabin Care | |
| Short Description: | Carpet shampoo and upholstery cleaner, concentrate. | |
| Long Description: | Carpet and upholstery cleaner for machine use or with a brush for spot cleaning by hand. | |
| Technical Datasheet: | TDS Ardrox 6082_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6085 [ previous name Aviawash Green Gel ] | |
| Category: | Cleaning General | |
| Short Description: | Cleaner, aircraft, exterior, heavy duty, water based. | |
| Long Description: | Heavy duty, exterior cleaning for heavily soiled areas such as smoke stained areas, engine nacelles, under wing flaps, landing gear and wheels/wheel bays.
Also a very suitable and effective wipe on/wipe off cleaner and even finds application in the workshops as a convenient alternative to soak tank cleaning processes for dirty parts and carbon removal | |
| Technical Datasheet: | TDS Ardrox 6085_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6086 [ Previous name Aviawash 5000 ] | |
| Category: | Cleaning General | |
| Short Description: | Aircraft Exterior Cleaner, General Purpose,
may be diluted with water. | |
| Long Description: | Cleaning of the exterior surfaces of aircraft using a foam applicator and by spray or brush application. It may also be used for cleaning ground equipment. | |
| Technical Datasheet: | TDS Ardrox 6086_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6092 [ Previous name Aviawash 5250 ] | |
| Category: | Exterior Cleaning | |
| Short Description: | Aircraft exterior cleaner, general purpose, concentrate | |
| Long Description: | Ardrox 6092 is a water based alkaline high performance cleaner for the exterior surfaces of aircraft. The product, which has been specially formulated using surfactants with excellent biodegradability, is supplied as a concentrate for dilution with water. In its diluted form it can be applied either as a foam or by spray or brush.
Ardrox 6092 is suitable for cleaning both civil and military fixed wing aircraft and helicopters. It may also be used for cleaning ground equipment. | |
| Technical Datasheet: | TDS Ardrox 6092_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 610C | |
| Category: | Cleaning General | |
| Short Description: | Solvent cleaner, emulsifiable, concentrate | |
| Long Description: | As a concentrate of solvents and wetting agents it is used diluted with kerosene to give a cold, water rinseable, degreasing solution. It will remove oil, grease and soft carbon sludge but its main application is in the cleaning of engineering components | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 6143 | |
| Category: | Cleaning General | |
| Short Description: | Heavy duty solvent exterior cleaner | |
| Long Description: | ARDROX 6143 is a biodegradable liquid cleaner containing a blend of natural citrus solvents, emulsifiers and surfactants for the removal of a wide range of soils including oils, grease, chewing gum, tar, inks, adhesives, decals, tyre marks, rubber residues from wheel bead seats and soap scum. | |
| Technical Datasheet: | TDS ARDROX 6143_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 631 | |
| Category: | Cleaning General | |
| Short Description: | Oil grease and carbon remover | |
| Long Description: | Removal of oil, grease and carbon deposits in one operation. It finds particular use in the aircraft field for cleaning compressor blades and casings for jet engines. It can also be used as an exterior surface cleaner for aircraft and is suitable for use in steam and pressure cleaners. It is a very fast and effective general maintenance cleaner for a wide variety of cleaning jobs on paint work and machinery. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6322 | |
| Category: | Gas Path Cleaning | |
| Short Description: | Gas path cleaner, solvent / water,
chlorinated-solvent free, concentrate,
cold weather material. | |
| Long Description: | In-situ washing of the compressor stages of gas turbine engines for removal of the accumulation of atmospheric impurities, oil and oil oxidation products that occur in these areas. With anti freeze addition may be used at temperature down to -30 C.
Ardrox 6322 is suitable for both cranked and fired washing but should be used in accordance with the engine manufacturers approved procedures. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6325 | |
| Category: | Cleaning General | |
| Short Description: | Carbon remover, aqueous base, ready to use. | |
| Long Description: | Ardrox 6325 is designed to remove carbonaceous and oily deposits from steel, aluminium and zinc based casting alloys.
Ardorx 6325 has distinct health and safety advantages over other decarbonisers in that it does not contain any chlorinated or aromatic solvents, phenols or cresols, caustic alkalis, acids of heavy metals. | |
| Technical Datasheet: | TDS Ardrox 6325_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 6333 | |
| Category: | Cleaning General | |
| Short Description: | General purpose cleaner for use in spray washing
machines, by immersion or as a hard surface cleaner. | |
| Long Description: | Removal of oil, grease and soft carbon deposits in spray washing machine applications. Low foaming at elevated operating temperatures. Other uses include engine and component cleaning by immersion and general hard surface cleaning. Dilution dependent on use. | |
| Technical Datasheet: | TDS Ardrox 6333_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6333A | |
| Category: | Cleaning General | |
| Short Description: | General purpose cleaner for use in spray washing
machines, by immersion or as a hard surface cleaner. | |
| Long Description: | Removal of oil, grease and soft carbon deposits in spray washing machine applications. Low foaming at elevated operating temperatures. Other uses include engine and component cleaning by immersion and general hard surface cleaning. Dilution dependent on use. | |
| Technical Datasheet: | Ardrox 6333A TDS_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6367 [ Previous name Turboclean 2 ] | |
| Category: | Gas Path Cleaning | |
| Short Description: | Gas path cleaner, aqueous, suitable for fired or
cranked washing, concentrate. | |
| Long Description: | In-situ washing of the compressor stages of gas turbine engines for removal of the accumulation of atmospheric impurities, oil and oil oxidation products that occur in these areas. It is suited for both hot-fired and cold motor-over washes. | |
| Technical Datasheet: | TI ax 6367 dt-engl 10-02-16_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6375 | |
| Category: | Gas Path Cleaning | |
| Short Description: | A liquid alkaline product formulated to clean the compressor sections of gas turbine engines. | |
| Long Description: | A blend of detergents and emulsifiers, for removing atmospheric soils, oils, carbon and salt deposits during "in-situ" hot-fired and cold motor washes. Ardrox 6375 is safe on all aircraft metals, plastics, windows, etc., is nonflammable and biodegradable. | |
| Technical Datasheet: | TDS Ardrox 6375_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6375 RTU | |
| Category: | Gas Path Cleaning | |
| Short Description: | A liquid alkaline product formulated to clean the compressor sections of gas turbine engines, supplied ready to use. | |
| Long Description: | A blend of detergents and emulsifiers, for removing atmospheric soils, oils, carbon and salt deposits during "in-situ" hot-fired and cold motor washes. ARDROX 6375 is safe on all aircraft metals, plastics, windows, etc., is nonflammable and biodegradable. | |
| Technical Datasheet: | TDS Ardrox 6375_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6376 | |
| Category: | Cleaning General | |
| Short Description: | Aqueous immersion cleaner, concentrate. | |
| Long Description: | Silicated, mildly alkaline, low-foaming, multi-metal safe cleaner. | |
| Technical Datasheet: | TI ax 6376 dt-engl 10-06-07_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6377 | |
| Category: | Gas Path Cleaning | |
| Short Description: | Compressor wash / gas path cleaner, concentrate | |
| Long Description: | Ardrox 6377 is a liquid alkaline product formulated to clean the compressor sections of gas turbine engines. A blend of detergents and emulsifiers, it removes atmospheric soils, oils, carbon, and salt deposits during "in-situ" hot-fired and cold motor washes. Ardrox 6377 is safe on all turbine metals, and is non-flammable and biodegradable. Regular cleaning with Ardrox 6377 helps maintain peak engine efficiency and reduces maintenance and fuel costs. Ardrox 6377 is compatible with recognized antifreeze materials used during cold weather cleaning.
Ardrox 6377 should be diluted with demineralized water. If demineralized water is not available, then use Ardrox 6377 RTU which is a ready to use formula. | |
| Technical Datasheet: | TDS Ardrox 6377_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6405 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft exterior cleaner, general purpose,
biodegradable surfactant system, concentrate. | |
| Long Description: | Removal of light grease and oils, dust, sooty deposits and other impinged soils from the exterior surfaces of aircraft by foam, brush or swab application. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 6412 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft exterior cleaner, heavy duty, low foam, concentrate. | |
| Long Description: | Removal of grease and oils, dust, sooty deposits and other impinged soils found on aircraft exterior surfaces, both painted and unpainted. May be used as supplied for very heavily soiled areas or diluted according to severity of soiling. It is an extremely powerful cleaner and may be used at much lower concentrations than many conventional cleaners. | |
| Technical Datasheet: | TDS Ardrox 6412_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6427 | |
| Category: | Cabin Care | |
| Short Description: | Aircraft interior cleaner, concentrate, water dilutable | |
| Long Description: | Removal of dirt and soil contamination from surfaces such as glass, metal and plastic. It will remove a wide range of soils including oil, grease, fingerprints, tea and coffee stains and other soils from aircraft furnishings. It is designed for use at dilutions of 10-15% by volume in water dependent on the degree and nature of contamination to be removed. Applied by cloth, sponge or spray to the soiled surface, then wiped off with a damp cloth or sponge after a few seconds. In areas with very high soil contamination, it may be necessary to rinse the surface with water after application of the cleaner. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6440 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft exterior cleaner, biodegradable, concentrate. | |
| Long Description: | Removal of light grease, oils, dust, sooty deposits and other impinged soils from painted surfaces and unpainted aluminium surfaces of aircraft. It readily produces stable emulsions with oils. It is unaffected by hard water and does not leave any residue or cause any streaking or staining that cannot be easily removed with water. | |
| Technical Datasheet: | TDS Ardrox 6440_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6471 | |
| Category: | Cleaning General | |
| Short Description: | Alkali cleaner, agitated immersion, inhibited | |
| Long Description: | ARDROX 6471 is a heavy-duty, liquid cleaner formulated to remove difficult soils in agitated parts cleaning tanks. It will remove heavy oils, grease, cosmoline, and other production soils. Because it is inhibited, it can be used to clean aluminum aerospace parts prior to chemical processing. ARDROX 6471 is a blend of alkalis, silicates, and low foam wetting agents, is not affected by hard water, and is safe on most metals. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6472 | |
| Category: | Cleaning General | |
| Short Description: | Exterior cleaner for aircraft, heavy duty | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6472M | |
| Category: | Cleaning General | |
| Short Description: | Heavy duty exterior cleaner, application, foam applied | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6475 | |
| Category: | Cleaning General | |
| Short Description: | Aqueous, immersion, alkali cleaner. | |
| Long Description: | ARDROX 6475 is a concentrated liquid aqueous alkali cleaner.
Used by immersion for the removal of oil, grease and soft carbon deposits. Contains biodegradable surfactants. | |
| Technical Datasheet: | TDS Ardrox 6475_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6481 | |
| Category: | Cleaning General | |
| Short Description: | Aircraft dry-wash exterior cleaner | |
| Long Description: | Ardrox 6481 is a thickened alkaline product which removes difficult oils, grease, carbonised exhaust tracks and smoke stains from aircraft surfaces, including engine nacelles, flap areas, wheel bays and landing gear. It can be used as a heavy-duty cleaner, as a wipe-on/wipe-off spot cleaner or as a precleaner before normal cleaning operations. It does not contain phosphates or petroleum solvents, is not affected by hard water and is safe on all metals, plastic and painted surfaces. Ardrox 6481 may be sprayed, brushed, or wiped onto the surface. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6484 | |
| Category: | Cleaning General | |
| Short Description: | Exterior aircraft cleaner | |
| Long Description: | Alkaline cleaner for the exterior cleaning of aircraft which complies with the EU Detergent Regulation, EC 648/2004 regarding biodegradability of surfactants used in detergents. In addition, it does not contain solvent and it is phosphate-free. | |
| Technical Datasheet: | TI ax 6484 dt-engl 05-09-06_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 6485 | |
| Category: | Cleaning General | |
| Short Description: | Heavy duty exterior aircarft cleaner, gel-type. | |
| Long Description: | A heavy duty, gel-type, alkaline cleaner for the exterior cleaning of aircraft which complies with the EU Detergent Regulation, EC 648/2004 regarding biodegradability of surfactants used in detergents. In addition, it does not contain solvent and it is phosphate-free. | |
| Technical Datasheet: | TI ax 6485 dt-engl 05-09-07_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 6613 | |
| Category: | Cleaning General | |
| Short Description: | Liquid alkali cleaner, caustic | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 666 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Carbon and paint remover, immersion. | |
| Long Description: | Removal of hard carbon, gums, varnish and baked on paint. If components are heavily oiled pre-cleaning is recommended. | |
| Technical Datasheet: | TDS Ardrox 666_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 666/6AC | |
| Category: | Paint Carbon and Oxide Removal | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 667 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Carbon and paint remover, immersion. | |
| Long Description: | Removal of carbon deposits, both hard and soft and of both air dried and stoved paint finishes including epoxies and acrylics. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 7050W | |
| Category: | Cleaning General | |
| Short Description: | Temporary protective coating remover, thickened,
ammonia free, ready to use. | |
| Long Description: | Removal temporary protective coatings from metal surfaces. The material is biodegradable, water rinsible and contains no ammonia. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 7132 | |
| Category: | Miscellaneous | |
| Long Description: | This is not really an Aerospace product but had GEC Alsthom approval | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 800/3 | |
| Category: | Non Destructive Testing | |
| Short Description: | Black magnetic ink, pre-mixed, high sensitivity. | |
| Long Description: | Magnetic Particle Inspection for the detection of surface and near surface defects in ferro-magnetic materials | |
| Technical Datasheet: | TDS Ardrox 800-3_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 8032 | |
| Category: | Non Destructive Testing | |
| Short Description: | Black magnetic ink, reay to use | |
| Long Description: | ARDRX 8032 is a ready-to-use high sensitivity black magnetic ink consisting of black iron oxide with a controlled, fine particle size, mineral oil and suspending agent in a high flash, low aromatic petroleum distillate.
ARDROX 8032 is used for revealing surface and near surface defects in ferro-magnetic materials e.g. mild and low alloy steels. | |
| Technical Datasheet: | TDS Ardrox 8032_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 8500 | |
| Category: | Non Destructive Testing | |
| Short Description: | Fluorescent magnetic ink | |
| Long Description: | A fluorescent magnet ink consisting of an iron oxide powder of finest particle size. It can be easily dispersed in a carrier oil with a high flashpoint. | |
| Technical Datasheet: | TI ax 8500 dt-engl 10-06-24_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 8501 | |
| Category: | Non Destructive Testing | |
| Short Description: | fluorescent magnetic ink ready-to-use | |
| Long Description: | ARDROX® 8501 is the ready-to-use suspension of a fluorescent iron oxide with the finest particle size in a carrier oil with a high flashpoint and low aromatic contents (< 0.03 %). | |
| Technical Datasheet: | TI ax 8501 dt-engl 07-11-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | Ardrox® 8505 | |
| Category: | Non Destructive Testing | |
| Short Description: | High-sensitivity fluorescent magnetic ink | |
| Long Description: | ARDROX® 8505 is a fluorescent magnetic ink consisting of an iron oxide powder of finest particle size. It can be easily dispersed in a carrier oil with a high flashpoint (i.e. ARDROX® Base Oil HF). ARDROX® 8505 is used for the high-sensitivity detection of surface and near surface defects in ferro-magnetic materials. | |
| Technical Datasheet: | TI ax 8505 dt-engl 10-04-30_doc | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 8544 | |
| Category: | Non Destructive Testing | |
| Short Description: | Fluorescent magnetic ink; aqueous carrier, ready to use | |
| Technical Datasheet: | TDS Ardrox 8544_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 8800 | |
| Category: | Non Destructive Testing | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 8901W | |
| Category: | Non Destructive Testing | |
| Short Description: | White background lacquer for visible Magnetic
Particle Inspection | |
| Long Description: | Provision of a white matt finish, free from reflections, to assist the viewing of defects. The smooth surface finish provided by this product allows magnetic inks to remain mobile on the surface for longer periods thus assisting the detection of fine defects. Especially useful when inspecting dark surfaces. | |
| Technical Datasheet: | TDS Ardrox 8901W_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 907P | |
| Category: | Non Destructive Testing | |
| Short Description: | Red dye penetrant, water-washable | |
| Long Description: | Ardrox 907P is a water washable red dye penetrant. It is used in an inspection process to find surface flaws, such as cracks and porosity, in all kinds of metal components. Ardrox 907P is available in bulk and aerosol form. | |
| Technical Datasheet: | TDS Ardrox 907P_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 907PB | |
| Category: | Non Destructive Testing | |
| Short Description: | Water-washable red penetrant | |
| Long Description: | ARDROX® 907PB is a water washable red dye penetrant. It is used e.g. in non-destructive testing of forged parts, welds, casts and drop forged parts. | |
| Technical Datasheet: | TI ax 907PB dt-engl 11-07-04_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9200 | |
| Category: | Miscellaneous | |
| Short Description: | Biocide and fungicide | |
| Long Description: | Ardrox 9200 is a biocide and fungicide incorporating a cyclic, amino-based compound and has a distinctive odour.
Ardrox 9200 is primarily intended to prevent and control the growth of bacteria, fungus, yeasts, etc. in penetrant carbon filter systems. | |
| Technical Datasheet: | TDS Ardrox 9200_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 945 | |
| Category: | Miscellaneous | |
| Short Description: | Active carbon for rinse water treatment. | |
| Long Description: | Active carbon for use in filtration systems for the removal of Ardrox penetrants and emulsifiers from rinse waters. | |
| Technical Datasheet: | TI ax 945 eng 10-07-13_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 9702 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 1 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 9702-9705 dt-engl 07-04-03_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9703 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TDS Ardrox 9703_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9704 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 9702-9705 dt-engl 07-04-03_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9705 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 3 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 9702-9705 dt-engl 07-04-03_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P22 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 1 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970p22-25 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P22E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 1 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970P22E - 970P26E dt-engl 10-03-02_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P23 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970p22-25 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P24 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970p22-25 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P24E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970P22E - 970P26E dt-engl 10-03-02_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P25 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 3 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970p22-25 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P25E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 3 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970P22E - 970P26E dt-engl 10-03-02_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 970P26E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 4 | |
| Long Description: | Water washable fluorescent penetrant suitable for the detection of defects open to the surface in metal and non-porous ceramic components during manufacture and overhaul. Exceptionally low level of background with excellent heat and UV fade characteristics. Ideal for electrostatic or immersion application. | |
| Technical Datasheet: | TI ax 970P22E - 970P26E dt-engl 10-03-02_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9812 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant, medium
sensitivity. AMS 2644 qualified, level 2 | |
| Long Description: | Fluorescent penetrant to be used with a separate emulsifier produces crisp indications with exceptionally low levels of background, has excellent heat and UV fade characteristics and is ideal for electrostatic application. | |
| Technical Datasheet: | TI ax 9812-9814 dt-engl 11-09-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9813 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant, high
sensitivity. AMS 2644 qualified, level 3 | |
| Long Description: | Fluorescent penetrant to be used with a separate emulsifier produces crisp indications with exceptionally low levels of background, has excellent heat and UV fade characteristics and is ideal for electrostatic application. | |
| Technical Datasheet: | TI ax 9812-9814 dt-engl 11-09-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9814 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant, ultra-high
sensitivity. AMS 2644 qualified, level 4 | |
| Long Description: | Fluorescent penetrant to be used with a separate emulsifier produces crisp indications with exceptionally low levels of background, has excellent heat and UV fade characteristics and is ideal for electrostatic application. | |
| Technical Datasheet: | TI ax 9812-9814 dt-engl 11-09-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 985P12 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant, medium
sensitivity. AMS 2644 qualified, level 2 | |
| Long Description: | Fluorescent penetrant to be used with a separate emulsifier produces crisp indications with exceptionally low levels of background, has excellent heat and UV fade characteristics and is ideal for electrostatic application. | |
| Technical Datasheet: | TI ax 985p11-14 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 985P13 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant, high sensitivity.
AMS 2644 qualified, level 3 | |
| Long Description: | Fluorescent penetrant to be used with a separate emulsifier produces crisp indications with exceptionally low levels of background, has excellent heat and UV fade characteristics and is ideal for electrostatic application. | |
| Technical Datasheet: | TI ax 985p11-14 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 985P14 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant, ultra-high sensitivity.
AMS 2644 qualified, level 4 | |
| Long Description: | Fluorescent penetrant to be used with a separate emulsifier produces crisp indications with exceptionally low levels of background, has excellent heat and UV fade characteristics and is ideal for electrostatic application. | |
| Technical Datasheet: | TI ax 985p11-14 dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9881 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant emulsifier, concentrate, for use with
Ardrox 98xx series fluorescent penetrants. AMS 2644 qualified. | |
| Long Description: | A hydrophilic emulsifier for the removal of Ardrox 9812, 9813 and 9814 fluorescent penetrants. Supplied as a concentrate for dilution with water. | |
| Technical Datasheet: | TI ax 9881 dt-engl 11-09-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 996PA | |
| Category: | Non Destructive Testing | |
| Short Description: | Red dye penetrant, solvent removable | |
| Long Description: | Ardrox 996PA aerosol process provides an effective, portable method of flaw detection. It consists of Ardrox 996PA red dye penetrant, Ardrox 9D1B developer and a solvent penetrant remover. Depending on the preferred flash point and evaporation rate, the penetrant remover can be Ardrox 9PR5, Ardrox PR1, Ardrox 9PR50A or Ardrox 9PR70.
The Ardrox 996PA flaw detection process is used as a local inspection method to find cracks, porosity and similar surface discontinuities in all types of metals, certain ceramics and plastics. It has wide uses in the general engineering and aerospace industries, particularly where large structures are encountered, or where immersion methods would be uneconomical or impossible. | |
| Technical Datasheet: | TDS Ardrox 996PA_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 996PB | |
| Category: | Non Destructive Testing | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9D1 | |
| Category: | Non Destructive Testing | |
| Short Description: | Developer powder for red dye penetrants. | |
| Long Description: | Ardrox 9D1 is a suspension of an inert white powder in a quick drying solvent. It has a low sulphur, halogen and alkali metal content and may be used with any of the Ardrox range of visible penetrants. | |
| Technical Datasheet: | TDS Ardrox 9D1_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9D1B | |
| Category: | Non Destructive Testing | |
| Short Description: | Developer Powder, Solvent Suspended. AMS 2644 qualified | |
| Long Description: | ARDROX 9D1B is a suspension of an inert white powder in a quick drying solvent. It has a low sulphur, halogen and alkali metal content. ARDROX 9D1B can be used with any of the ARDROX range of visible and fluorescent penetrants. | |
| Technical Datasheet: | TI ax 9d1b dt-engl 03-08-26_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9D4A | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant developer, powder.
AMS 2644 qualified. | |
| Long Description: | Increased visibility of defects during fluorescent penetrant inspection. Very high speed of development and resistance to excessive bleed-out of penetrant from defects ensures any defects are much easier to see when viewed under ultra-violet light. | |
| Technical Datasheet: | TDS Ardrox 9D4A_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9D4E | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant developer, halogen free | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | Ardrox® 9D75L | |
| Category: | Non Destructive Testing | |
| Short Description: | Developer | |
| Long Description: | ARDROX® 9D75L is delivered as a user-friendly, liquid non-flammable concentrate. The product is a clear, yellowish solution consisting of inorganic salts, inhibitors and surfactants. ARDROX® 9D75L does not contain any chromates. ARDROX® 9D75L can be used with numerous cleaners and visible and fluorescent penetrants of the ARDROX® range. | |
| Technical Datasheet: | TI ax 9d75L dt-engl 10-06-02_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 9D76 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant Developer, powder, water suspendible.
AMS 2644 qualified. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR1 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover for red dye systems. Hydrophilic. AMS 2644 qualified. | |
| Long Description: | Removal of red dye penetrants. It is an aqueous mixture of solvents and inhibitors with low sulphur, halogen and alkali metal content. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
| Product Name: | ARDROX® 9PR12 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant emulsifier, concentrate, for use with
Ardrox 985 fluorescent penetrants. AMS 2644 qualified. | |
| Long Description: | A hydrophilic emulsifier for the removal of Ardrox 985P12, 985P13 and 985P14 fluorescent penetrants. Supplied as a concentrate for dilution with water. | |
| Technical Datasheet: | TI ax 9pr12 dt-engl 11-09-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR3 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover. AMS 2644 qualified. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR5 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover, solvent, for fluorescent and
visible penetrants. AMS 2644 qualified. | |
| Long Description: | A solvent penetrant remover used for the removal of both visible red dye and fluorescent penetrants. It can also be used as a solvent precleaner prior to the penetrant application for the removal of oil and greases. | |
| Technical Datasheet: | TDS Ardrox 9PR5_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR50 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover, solvent, for fluorescent and
visible penetrants. AMS 2644 qualified. | |
| Long Description: | A solvent penetrant remover used for the removal of both red and fluorescent penetrants. It can also be used as a dry cleaning solvent to remove oils and greases. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR50A | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover, solvent, for fluorescent and
visible penetrants. AMS 2644 qualified. | |
| Long Description: | A solvent penetrant remover used for the removal of both red and fluorescent penetrants. It can also be used as a dry cleaning solvent to remove oils and greases. | |
| Technical Datasheet: | TDS Ardrox 9PR50A_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR70 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover, solvent, for fluorescent and
visible penetrants, Halogen free. AMS 2644 qualified. | |
| Long Description: | A solvent penetrant remover used for the removal of both red and fluorescent penetrants. It can also be used as a dry cleaning solvent to remove oils and greases. Halogen free. | |
| Technical Datasheet: | TDS Ardrox 9PR70_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9PR88 | |
| Category: | Non Destructive Testing | |
| Short Description: | Penetrant remover for red dye systems. Hydrophilic. AMS 2644 qualified. | |
| Long Description: | Removal of red dye penetrants. It is an aqueous mixture of solvents and inhibitors with low sulphur, halogen and alkali metal content. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® 9VF2 | |
| Category: | Non Destructive Testing | |
| Short Description: | Red dye penetrant that can also be used in fluorescent mode with ultra-violet light. | |
| Technical Datasheet: | TI ax 9vf2 dt-engl 04-02-05_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 100D ( formerly Dinitrol ) | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion inhibiting compound for protection of all commonly used aerospace metals and alloys. Thixotropic, heavy duty, firm, waxy film. | |
| Long Description: | Ardrox 100D is designed for use in areas where a severely corrosive environment is expected; pretreatment with the penetrating compound Ardrox AV 8 is required. Application should be by spraying. | |
| Technical Datasheet: | TDS ARDROX AV 100D_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 15 ( formerly Dinitrol ) | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion inhibiting compound, super penetrating, water displacing,
heavy-duty, for protection of all commonly used aerospace metals
and alloys. Tack-free firm film. | |
| Long Description: | Ardrox AV 15 can be used in all areas of the airframe, offering good corrosion protection at a very low film weight. Applied by dipping, brushing or spraying the viscosity can be adjusted to allow easy application in difficult to reach areas. | |
| Technical Datasheet: | TDS ARDROX AV 15_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 25 ( formerly Dinitrol ) | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion inhibiting compound, penetrating and water displacing, general purpose, soft, waxy film. | |
| Long Description: | Ardrox AV 25 can be used in all areas of the airframe. It is designed for treatment of areas where a soft, lubricating film is required, such things as pulleys, control cables and other movable parts. Application is preferably by spraying but it can also be applied by brushing. | |
| Technical Datasheet: | TDS ARDROX AV 25_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 30 ( formerly Dinitrol ) | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion inhibiting compound, penetrating, water displacing, tack - free, waxy film. | |
| Long Description: | Ardrox AV 30 is the most versatile of the range of corrosion inhibiting compounds. It combines penetrating and water displacing properties with excellent corrosion protection ability from a single pass application and also provides the lowest film weight of this range of products. | |
| Technical Datasheet: | TDS ARDROX AV 30_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 40 ( formerly Dinitrol ) | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion inhibiting compound for protection of all commonly used aerospace metals and alloys producing a colourless, heat resistant, dry, firm film. | |
| Long Description: | Ardrox AV 40 is designed for use in areas exposed to elevated temperatures. Typical areas of application are engine parts, pylons, cowlings etc., exposed to temperatures of up to 150 C, with short term exposure of up to +210 C. Being colourless Ardrox AV 40 can be applied to the exterior of aircraft in areas where the skin is exposed to hot exhaust gasses, for example around the APU exhaust outlet. Application is by spraying. | |
| Technical Datasheet: | TDS ARDROX AV 40_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 8 ( formerly Dinitrol ) | |
| Category: | Corrosion Inhibition and Dewatering | |
| Short Description: | Corrosion inhibiting compound, super penetrating, water displacing. Tack-free, firm film. | |
| Long Description: | Ardrox AV 8 can be used in all areas of the airframe. Applied by dipping, brushing or spraying. In areas exposed to severe corrosion conditions overcoating with Ardrox AV 100D is required. | |
| Technical Datasheet: | TDS ARDROX AV 8_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® AV 980 ( formerly Dinitrol ) | |
| Category: | Cleaning General | |
| Short Description: | A neutral, diodegradable wax remover for removal of corrosion inhibiting compound films. | |
| Long Description: | Ardrox AV 980 is used for cleaning and degreasing of aircraft surfaces and components where an old corrosion inhibiting compound film, and / or grease needs to be removed safely and effectively from such areas as internal structures or wheel wells. It is also for removal of contamination of external surfaces resulting from accidental over-spray or by material penetrating through loose fasteners to the outside surface of the aircraft. The material is slightly thixotropic to allow an even film build in all areas without excessive drippage. | |
| Technical Datasheet: | TDS ARDROX AV 980_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® Base Oil HF | |
| Category: | Non Destructive Testing | |
| Short Description: | High flash point magnetic ink carrier fluid | |
| Long Description: | For suspension of magnetic partical inspection inks | |
| Technical Datasheet: | TI ax base oil hf dt-engl 10-06-01_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® NQ1 | |
| Category: | Non Destructive Testing | |
| Short Description: | Solvent-Based Developer | |
| Long Description: | ARDROX® NQ1 is a suspension of an inert white powder in a quick drying solvent. It has a low sulphur, halogen and alkali metal content. It is used e.g. in non-destructive testing of forged parts, welds, casts and drop forged parts. ARDROX® NQ1 is used with any of the ARDROX® range of visible penetrants. | |
| Technical Datasheet: | TI ax NQ1 dt-engl 09-05-20_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® Orthosil F2 | |
| Category: | Cleaning General | |
| Short Description: | Alkali cleaner, spray or immersion, powder | |
| Long Description: | Ardrox Orthosil F2 is a blend of caustic alkali and silicates in combination with alkali builders and surfactants which can be used either as a soak cleaner or as a spray washing machine additive for the removal of oil, grease and general soils from ferrous components. | |
| Technical Datasheet: | TDS Ardrox Orthosil F2_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P131D | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 1 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P131E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 1 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P133D | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P133E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P134D | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P134E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 2 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P135D | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 3 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P135E | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 3 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P136D | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 4 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P6F4 | |
| Category: | Non Destructive Testing | |
| Short Description: | Water washable fluorescent penetrant
AMS 2644 qualified, level 3 | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P6R ( previous name Bio-Pen P6R ) | |
| Category: | Non Destructive Testing | |
| Short Description: | Red dye penetrant, solvent removable, AMS 2644 qualified | |
| Long Description: | The Ardrox P6R penetrant system for flaw detection consists of three aerosol products which are used in a particular process sequence to reveal surface defects in metallic and non-metallic materials. It consists of Ardrox P6R Red Penetrant, Ardrox 9D1B Developer and a solvent penetrant remover.
Depending on the preferred flash point and evaporation rate the solvent penetrant remover can be Ardrox 9PR5, ArdroxPR1, Ardrox 9PR50A or Ardrox 9PR70.
Ardrox Overchek Developer can be used as the developer to view the components under ultra violet light. This gives a higher sensitivity system than with conventional colour contrast penetrants.
These products have been specially formulated to provide a high quality penetrant inspection process which is environmentally acceptable. | |
| Technical Datasheet: | TDS Ardrox P6R_pdf | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P7F2 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant.
AMS 2644 qualified, level 2. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® P7F3 | |
| Category: | Non Destructive Testing | |
| Short Description: | Post emulsifiable fluorescent penetrant.
AMS 2644 qualified, level 3. | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® Solvent Additive 6 | |
| Category: | Paint Carbon and Oxide Removal | |
| Short Description: | Remedial additive for 6 series paint removers | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| | Get Approvals | |
| | |
|
| Product Name: | ARDROX® TEST | |
| Category: | Cleaning General | |
| Technical Datasheet: | Contact local Chemetall facility | |
| Safety Datasheet: | Request safety info data sheets | |
| Approvals: | Contact local Chemetall facility | |
| | |
|
|
Products